-
Click Route Conduit
.
-
Select a starting point in the graphic view for the new conduit to display the New Conduit Run dialog.
If you select a feature located at the end of an existing run, the software continues
the run of the selected feature. Skip to step 5.
-
Select the system for the conduit in the System box.
The System box lists up to the last ten selected systems. Choose More... to browse all applicable systems in the workspace and model database.
-
In the Name box, type the name of the conduit that you are creating. If you do not enter a name, the software automatically generates a name.
You can choose a naming rule in the Name Rule box, if necessary.
-
If necessary, change the specification of the new conduit in the Specification box.
-
If necessary, select a diameter in the Nominal Conduit Diameter box.
Use the Category option to view more properties that you can set for the conduit.
-
Click OK to return to the Route Conduit command.
-
On the ribbon, click Plane
and select your working surface. See Plane Ribbon Options.
-
Click in the graphic view to route the conduit.
You can use PinPoint, Point Along, and the SmartSketch3D relationship indicators when defining your conduit.
-
Right-click to end routing the conduit.
Using the Angle and Length constraints, you can lock these parameters while routing a conduit.