Displays options for editing a cableway end feature.
Properties
Displays the Cableway End Feature Properties dialog.
Move From
Click to specify the starting location of the move vector. If you do not define a starting point, the software assumes that the current location of the object is the starting point.
Move To
Click to specify the ending location of the move vector.
When you move, or modify a route object in HVAC, Electrical, or Piping, Smart 3D treats any unfinished ends as free end features. An unfinished end is an end with mating parts or a logical data connection with one logical port. You can reconnect using these free end features. This behavior allows you to reuse existing mating parts and connections and reduces wait times.
Plane
Sets a working plane for the route path. Six options are available:
Plan Plane
Defines the work surface as the XY plane at the depth of the active end. You also can press CTRL+1 to select this option.
Elevation Plane: East-West ( Z Plane: X-Axis)
Defines the work surface as the XZ plane. You also can press CTRL+2 to select this option.
Elevation Plane: North-South ( Z Plane: Y-Axis)
Defines the work surface as the YZ plane. You also can press CTRL+3 to select this option.
Plane by Turn/Branch
Defines the work surface as the plane defined by an existing turn or branch. You select the turn or branch to set the plane. You also can press CTRL+4 to select this option.
Plane by Three Points
Defines the work surface using three points that you define. You also can press CTRL+5 to select this option.
No Plane
Clears any work surfaces. The software does not project points that you place to any plane. You also can press CTRL+6 to select this option.
Run
Displays the name of the cableway associated with the end feature.
Part
Allows you to specify the part associated with the end feature.
Angle Lock
Locks or unlocks the Angle box.
Leg Angle
Displays the angle of any turn or branch component that is located at the other end of the leg with which the selected end feature is associated. This box is disabled if no turn or branch exists at the other end of the leg. Changing the angle value adjusts the position of the selected end feature to achieve the specified angle and then locks that angle value. Unlock to dynamically update the angle as you move the selected end component.
Length Lock
Locks or unlocks the Length box.
Length
Displays the length of the cableway connected to the end being edited. Entering a value in this box adjusts the position of the selected end feature to achieve the specified length and then locks that length value. Unlock to dynamically update the length value as you move the selected end component.
Offset
Controls the SmartSketch® offset constraint. Type a distance to offset the cableway. Select <Disabled> if you do not want to use the offset. Select Set Offset Reference to define a reference point. See Set Offset Reference Dialog (Cableway).