Displays and defines the cross section properties of the transition that you are inserting.
Standard
Position
Displays or defines the start or end face of the transition.
Cross Section
Defines the shape of the cross section. You can select from rectangular, round, and flat oval. If the cross section is round, only one other property is available: Diameter.
Width
Sets the width dimension for rectangular and flat oval cross sections. Values stored in the reference data determine the list of options. The list displays only the values that are valid for the current depth. If the depth is not defined (that is, the Depth box is blank), all widths listed in the current specification are shown.
Depth
Sets the depth of the cross section for rectangular and flat oval cross sections. Values stored in the reference data determine the list of options. The list displays only the values that are valid for the current width. If the width is not defined (that is, the Width box is blank), all depths listed in the current specification are shown.
Diameter
Determines the diameter for round cross sections. Values stored in the reference data determine the list of options. You can also enter a value that is not on the list.
Orientation Angle
Specifies an angle between the local axis associated with the cross section and the width axis. If the angle value is zero, the width is aligned with the local cross-section axis.
The following picture shows the orientation angle (C).
(A) - Cross section |
Fill Information
Percent Fill
Displays or defines the percent cable fill in the cableway feature.