Weld (DrawingWeldLeader) - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Drawings and Reports Reference Data

Language
English
Product
Intergraph Smart 3D
Subproduct
Drawings and Reports
Search by Category
Reference Data
Smart 3D Version
12 (2018)

Connects the leader line to either the left-most or right-most point of the weld line, depending on the orientation of the label.

The following image shows the leader line connecting to the left-most point of the weld line.

drawingweldleaderexample

1 - Leader line
2 - Weld line

Customization

breakline

Controls whether or not a breakline appears for the label. The breakline normally connects the leader line to the label.

Type -1 to place a leader jog.

BreaklineOn

Type 0 to omit the leader jog.

BreaklineOff

style

Defines the appearance of a leader line.

Specify any of the following styles.

  • ANSI: Applies a thin, solid, dark cyan line style with a filled arrow terminator to the leader line.

ansi_style

  • ANSI_FRACTIONAL: Applies a thick, solid, dark cyan line style with a filled arrow terminator to the leader line.

ansi_fractional_style

  • ANSI_NOARROW: Applies a thick, solid, dark cyan line style with no terminator to the leader line.

ansi_noarrow_style

  • JIS: Applies a thick, solid, dark cyan line style with a large, open arrow terminator to the leader line.

jis_style

  • ISO: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.

iso_din_bsi_style

  • DIN: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.

iso_din_bsi_style

  • ASA: Applies a thick, solid, dark cyan line style with a filled arrow terminator to the leader line.

asa_style

  • BSI: Applies a thick, solid, dark cyan line style with a large, filled arrow terminator to the leader line.

iso_din_bsi_style