Create Volume by Faces Ribbon - Intergraph Smart 3D - Help

Intergraph Smart 3D Compartmentation

Language
English
Product
Intergraph Smart 3D
Subproduct
Compartmentation
Search by Category
Help
Smart 3D Version
12 (2018)

Sets options for placing a volume defined by faces and boundaries.

Volume Properties

Displays the Properties dialog, which allows you to set properties for the compartment, ship zone, or void space that you are placing. See Compartment Properties Dialog, Ship Zone Properties Dialog, or Void Space Properties Dialog.

Select Faces

Allows you to specify the faces for the volume definition.

Finish

Generates the defined volume and exits the command.

Select Planes or Plates

Selects reference planes, grid planes, or plates. This method is the default.

Select Faces by 3D Range

Allows you to specify a three-dimensional range box using two diagonal points. You can select faces inside and overlapping this range.

Select Faces by Point

Allows you to specify a point. The surrounding faces of the smallest volume enclosing this point are selected. When there is more than one possible volume, this point is used to resolve the ambiguity.

Plate Filter

Restricts the selection of plates or grids to one of the following types:

  • Grid Planes and Plates - All plate systems, grid planes, and reference planes.

  • All Plate Systems - All plate systems.

  • Grid Planes - All grid planes and reference planes.

  • Water Tight Plates - Plate systems with the Tightness property defined as Water Tight.

  • Air Tight Plates - Plate systems with the Tightness property defined as Air Tight.

  • Oil Tight Plates - Plate systems with the Tightness property defined as Oil Tight.

  • Non Tight plates - Plate systems with the Tightness property defined as Non-Tight.

  • More - Opens the Select Filter dialog, where you can define a custom filter. As an example, you can restrict selection to the reference planes of one coordinate system when multiple coordinate systems exist in the model. See Select Filter Dialog in the Common Help and Create a filter for a grid system.

Reject

Removes the selected faces.

Accept

Accepts the selected faces

Face

Displays the Face List Dialog, from which you can view information about the selected faces for the volume. You can use this dialog to add or remove faces.

Select Volumes for Addition

Allows you to select additional volumes (graphically or from the Workspace Explorer) to add to the current volume definition. First, select a volume in a graphic view or from the Workspace Explorer, and then click Add to add the volume to the list.

Select Volumes for Subtraction

Allows you to select volumes (graphically or from the Workspace Explorer) and then remove the selected volume from the volume definition.

Volume List

Displays the Boolean Operation List Dialog, which lists the volumes added to or subtracted from the overall volume. You can add or remove volumes using the buttons on this dialog.

Name

Displays the default name for the volume (as dictated by the active name rule), and allows you to type a different name, if needed. 

Type

Specifies the type of volume. Selecting More opens the Select Volume Dialog, from which you can select a type.

Space Folder

Allows you to assign the new volume to a folder in the space hierarchy. See Create a space folder.