Modify a straight segment in a path - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Compartmentation

Language
English
Product
Intergraph Smart 3D
Subproduct
Compartmentation
Search by Category
Help
Smart 3D Version
13.1
  1. Click Select .

  2. Select the volume for which you want to modify the path.

    SHARED Tip You can modify the path for volumes created with Place Volume Along Path Command , but not for volumes created with other volume commands.

  3. On the ribbon, click Path to view the Edit Path ribbon.

  4. Select the straight segment that you want to modify.

  5. To change the line type for the segment, click a new type in the Path Type list.

  6. To change the plane for the segment, click a new plane in the Plane list.

  7. To delete the segment, click Delete Delete CLASSIC ICON.

  8. If you want the length of a straight segment to remain constant when you move the segment, click Length Locked .

    • When the segment length is locked, the software automatically modifies the turn points, along with the length and angle of adjacent segment, to remain connected to the moved segment. The length of the moved segment does not change.

    • When the segment length is not locked, the software extends or shortens the associated segments to connect with the new position of the moved segment. The length of the moved segment can change.

  9. Click Finish to view the Place Volume Along Path ribbon.

  10. Click Finish.

  • You can also Move segments of a path.

  • When the cross-sectional type is defined as Sketch, the Show Cross-Section View button is available on the edit ribbon.