Add Ad Hoc Note to control points for drawings - Intergraph Smart 3D - Help

Intergraph Smart 3D Common

Language
English
Product
Intergraph Smart 3D
Subproduct
Common
Search by Category
Help
Smart 3D Version
13

You can set a control point to have an ad hoc note on the drawings.

  1. In the Hangers and Supports task, place a control point on the support. Select Insert > Control Point to display the Control Point Ribbon (Placement).

  2. Select the parent object for the control point.

  3. Set the Subtype for the control point to Ad Hoc Note.

  4. Create a note associated with the control point.

    1. Open the Control Point Properties Dialog Box for the control point.

    2. Click the Notes tab.

    3. Click New Note.

    4. Specify the control point properties as follows:

      Select ControlPoint2 from the Key Point list.

      Select Ad Hoc Note from the Notes at this location, listed by name list.

      Select Fabrication from the Purpose of Note list.

      Type Paint member yellow in the Note Text box.

  5. Go to the Drawings and Reports task, and update the drawing for the structure.

    The updated drawing shows a label with the note added at the control point location.

You can create rules to use the control point subtypes to classify the control point for use in drawings and reports. For more information, see Control Point Subtype Sheet in the Smart 3D Reference Data Guide available from the Help > Printable Guides command in the software.