Display Tab (Interference Dialog) - Intergraph Smart 3D - Help

Intergraph Smart 3D Common

Language
English
Product
Intergraph Smart 3D
Subproduct
Common
Search by Category
Help
Smart 3D Version
13.1

Defines which interferences you want to view in the model. This tab does not appear on the server.

Type

Displays the following types of interference:

Severe

Select if you want to display the most critical interferences. They represent situations where a piece of equipment overlaps another piece of equipment or a pipe interferes with a beam. The symbol that is slightly transparent red represents this type of interference.

Optional

Select if you want to display optional interferences, interferences that you must decide whether or not to accept. For example, the maintenance area of one piece of equipment overlaps the maintenance area of another. The symbol that is yellow represents this type of interference.

Optional Interferences

Clearance

Select if you want to display clearance interference, interferences where two or more pieces of equipment do not meet the specification clearance criteria. The symbol that is green represents this type of interference.

Clearance Interference Checking

Required Action

Displays the following interference options based on their associated required actions:

Undefined

Select if you want undefined interferences to appear. These interferences have not been reviewed.

Edit

Select if you want unacceptable interferences to appear. These interferences have been reviewed and require resolution.

None

Select if you want accepted interferences to appear. These interferences have been reviewed and can be safely ignored.