What's New in Common - Intergraph Smart 3D - Help

Intergraph Smart 3D Common
Language
English
Product
Intergraph Smart 3D
Subproduct
Common
Search by Category
Help
Smart 3D Version
13.1

The following changes have been made to the Common task.

Hot Fix and Service Pack Updates

  • The software now checks for cross-project relationships between subscribed objects and objects created or modified in the active project. See Demolish and undemolish Smart Interop Objects in the model and Performing a move operation with native objects in relation to subscribed objects Smart Interop Objects in the Move Command. (3174745)

  • Added the following Custom Commands:

    • Remove SDx Registration (2310825)

    • Update Duct Features Orientation (1744643)

    • Update Weight and Center of Gravity (2555304)

  • The Generate SIO Utility supports transformation settings in a Smart Model from Smart Interop Publisher to specify its location within a site. For each translated Smart Model and Composite (.svf) Smart Model, Smart Interop Publisher generates an .iop file that Smart 3D and the Generate SIO Utility reads to obtain the required model location. See Generate Smart Interop Objects. (P3 CP:393148)

  • The Route Smart Interop Diagnostics Command corrects the data inconsistency in the routing of Smart Interop object data (primarily piping). (3519183, 2019670, 3448721)

  • The RepairSIOMemberPartLCS custom command has been added to correct SIOMemberParts that have invalid local coordinate system (LCS) information. Invalid LCS information can create problems during drawing extraction from SIOMemberParts. The RepairSIOMemberPartLCS custom command generates the LCS for a selected SIOMemberPart. (3715464) See Custom Commands.

  • You can now detect and repair disconnections in raceway networks using the Connect Raceways Command. (244221)

  • The Find Object by OID custom command has been replaced by the .net custom command View Smart Interop Object Unmapped Properties. See custom commands.

  • The following custom commands are no longer delivered with the software. (3759690 and 3759687)

    • Detect Topological Errors (ProgID: ValidateFlowDirCmd.ValidateFlowDir)

    • Fix Project Root (ProgID: SP3DPRJMGTRepairCmd.FixCnfgProjectRoot)

    • Fix Sector Size of Documents (ProgID: DwgBinaryEditorCmd.FixSectorSize)

    • GCMenu.Activate (ProgID: GC Menu)

    • Model Data Reuse (MDR) Validation Tool (ProgID: MDRValidation.CValidateGeometry)

    • Modify Style (ProgID: ModifyStyleCmd.ModifyStyles)

    • Profile Auto Bound (ProgID: mhprofileautobound.AutoBoundProfile)

    • Remove Design Basis (ProgID: IMSEngFrameworkCmd.RemoveDsgnBasis)

    • Repair Documents (ProgID: DwgRepairCmd.RepairDocuments)

    • Synchronize Drawing Component Templates (ProgID: DwgSynchTemplatesCmd.SynchTemplates)

    • Verify P&ID Integrity (ProgID: SP3DDisplayPIDService.VerifyPIDCmd)

    • Verify Seam Pattern to Split (ProgID: SplitCommands.VerifySeamPatternToSplit)

    The Check Database Integrity and Clean Database commands that had been previously listed are available in the Project Management Tools menu.

  • All references to Visual Basic (VB6) have been replaced with .NET (VB.NET or C#) code and examples.

  • You can correlate one D&ID duct run to multiple Smart 3D duct runs. See Correlate model objects with design basis objects. (4064054)

  • Removed the Bracketed aspect from the end cut types in the Format View Dialog. (4295512)

Version 13.1

  • You can now map cross-section and material data of Smart Interop Objects (SIO) members to catalog data when converting an SIO member to a Smart 3D member. See Convert SIO Structure to S3D Dialog. (P2 CP:379880)

  • Updated the Configuration File path on the Convert SIO Structure to S3D Dialog, and added information about supported and unsupported conversions in Convert SIO to S3D Structure. (P2 CP:382036)

  • The Re-Synchronize Dialog enables you to display a list of objects synchronized to SDx with warnings. (P2 CP:383160)

  • In the Change Management model, you can only modify objects in the active project. (P2 CP:384856)

  • The Set Design Review Status Command now includes checking for dangling relationships as part of the verification process. See Set Design Review Status Dialog. (P2 CP:388087)

  • The commands for copying Smart Interop Object (SIO) equipment, structure, and piping objects to native Smart 3D objects are now available under Tools > Utilities > Convert SIO to Native S3D Command in the Common task. (P2 CP:380145, P3 CP:385615)

  • Added the following Custom Commands:

    • Detect and Repair Run End Relations in Smart Interlop Objects (P2 CP:346739)

    • Modify Properties (P2 CP:366013)

    • Detect Discontinuous Runs and Topological Errors (P2 CP:374181)

    • Set Object Classification (P2 CP:380202)

    • Repair SIO System Parent Assignment (P2 CP:386639)

    • Purge VUE Extraction Control Data (P3 CP:389828)

  • Updated role names for administrators, designers, engineers, and viewers. (P3 CP:382267)

  • The new Update Cable Fill command updates the cable fill value for all the selected raceways (cable trays or conduits) or specific raceways through which the selected cables are routed. (P3 CP:379284)

  • You can now move a Smart Interop Object support that is connected to a supported object and a supporting object. Previously, you had to delete the existing SIO support and create a new one. See Command Behavior with SIO Supports in Move Command. (P3 CP:363805)

  • The software displays warning information in the Set Design Review Status Dialog if any of the objects that belong to the project are in a warning state. (P3 CP:382948)

  • The following commands for the Space Management task and the Compartmentation task are available under Tools > Volume Services:

  • In the Change Management model, the View Active Change Action Command enables you to move from Smart 3D to SDx. (P4 CP:370858)

  • The Demolish Ribbon and the Undemolish Ribbon now include the options for setting the Construction Requirement and Construction Type for the selected Smart Interop Object.

  • Added information about using the Name hyperlink in the Project Operations Dialog to move from Smart 3D to the Info Map view for the corresponding change action in SDx.