Add middle segments to existing wall using 2-D sketch - Intergraph Smart 3D - Help

Intergraph Smart 3D Civil

Language
English
Product
Intergraph Smart 3D
Subproduct
Civil
Search by Category
Help
Smart 3D Version
12 (2018)
  1. Click Select on the vertical toolbar.

  2. Set the Locate Filter to Wall Systems.

  3. Select the wall to which to add segments.

  4. Click Select a Path on the Place Wall Ribbon.

  5. Click Sketch 2D on the ribbon.

  6. Select objects in the model that you want to see when sketching the wall path in the 2-D environment.

  7. Click Draw .

  8. Click Split on the vertical toolbar.

  9. Identify the two locations on the wall between which you want to add to the wall. Be sure to use the Bottom Up option during selection.

  10. Click Add or remove graphic from a group on the Change toolbar.

  11. Click Select Graphic Group on the ribbon.

  12. Select the original wall path. Be sure to use the Bottom Up option during selection.

  13. Click Select elements to add to group or remove from it on the ribbon.

  14. Select the segment of the wall path between the two points that you identified during the Split command. Be sure to use the Bottom Up option during selection.

  15. Click Remove on the ribbon. You have now removed the segment from the wall path group.

  16. Click Select on the vertical toolbar.

  17. Select the segment between the two points that you just removed from the group. Be sure to use the Bottom Up option during selection.

  18. Press Delete on the keyboard.

    You should now have a wall path with a gap in it.

  19. Using commands on the vertical toolbar, like the Line command, draw the new wall segment in the gap. Make sure you connect to the two ends of the gap.

  20. In the 2-D environment, click Close .

  21. Click Finish.

  22. Set the wall system, type, composition, and other properties.

  23. Optionally, click Select Boundaries to limit the height of the wall.

  24. Click Finish to place the new wall segments in the model.