Place a slab by selecting boundary objects - Intergraph Smart 3D - Help

Intergraph Smart 3D Civil

Language
English
Product
Intergraph Smart 3D
Subproduct
Civil
Search by Category
Help
Smart 3D Version
12 (2018)

Show me

  1. Click Place Slabs Command on the vertical toolbar.

  2. Set the parent system for the slab, the slab type and composition, and face position.

  3. Define a plane for the slab.

    Define Plane as Coincident
    Define Plane using Offset from Plane
    Define Plane using Angle to Plane
    Define Plane using Vector and Point
    Define Plane using Three Points

  4. Click Accept .

  5. Click Select Boundaries on the Place Slab Ribbon.

  6. Select objects in the model to define the boundaries of the slab. You can select members, grid lines, edges of equipment, edges of other slabs, or most anything else in the model to define the slab boundaries. The selected objects must roughly define a close shape.

  7. Click Accept to display the slab in dynamics.

  8. Click Finish.