Place a trench by bottom cardinal point with top slope parallel to bottom slope - Intergraph Smart 3D - Help - Hexagon PPM

Intergraph Smart 3D Civil

Language
English
Product
Intergraph Smart 3D
Subproduct
Civil
Search by Category
Help
Smart 3D Version
13.1
  1. In the Grids task, create grids as needed for drawing the trench path.

  2. In the Civil task, click Place Trench Command .

  3. Click Path on the Place Trench Ribbon, and define the path of the bottom of the trench.

  4. Select a cardinal point at the bottom of the trench: Bottom Left , Bottom Center , or Bottom Right .

  5. Select Define start depth (Top slope is parallel to bottom slope) Civil Define start depth with top parallel to bottom ICON as the placement method.

    The top slope is defined as parallel to the trench path.

  6. Select the parent system of the trench run.

  7. Select a trench type and its respective cross-section.

    The start depth is defined by the Catalog during placement. You can modify this after placement. See Modify a trench feature.

  8. Click Finish to create the trench. An example trench elevation is shown below.

    1 - Drawn trench path with varying global Z-coordinates along the path

    2 - Defined bottom cardinal point for cross-section

    3 - Defined start depth from trench cross-section

    4 - Defined top slope, parallel to the drawn trench path

    5 - Defined footing thickness from trench cross-section

    6 - Trench depths, equal to the defined depth (3)