The General Surface Assembly Connection node (the GeneralSurfaceAsmConn sheet in the StructAssemblyConnections.xls workbook) defines the general surface assembly connections that you can place using the Place Assembly Connection Command in the Structure task. These assembly connections connect a member end to a flat surface by trimming the member end to the surface.
Name
Specifies the name of the assembly connection. This is the name that appears in the interface when you are placing the assembly connection.
Clearance
Specifies the distance between the end of the member and the surface.
Definition
Specifies the surface assembly connection definition macro.
With Pad
Type 1 to place a steel pad between the member end and the surface. Type 0 to have the member end connect directly to the surface.
Pad Type
Defines the shape of the pad. Type 1 to have the software automatically select the pad type. Type 2 to place a rectangular pad. Type 3 to place a circular pad. Type 4 to place a triangular pad.
Sizing Rule
Select whether you want to the software to automatically size the pad or if you want to size the pad. Type 1 to have the software size the pad. Type 2 to use a user defined size.
Offset
Type the distance between the end of the member and the face of the surface.