Cross Section Symbol HP - Intergraph Smart 3D - Help - Hexagon

Intergraph Smart 3D Catalog

Language
English
Product
Intergraph Smart 3D
Subproduct
Catalog
Search by Category
Help
Smart 3D Version
13.1

The HP cross section symbol uses the following properties.

Section Name

Type the section name. This name appears when you label members. The section name must be unique within the section standard.

Short Name

Type the short name for the section.

EDI Name

Type the Electronic Data Interchange name for the section.

Group Id

Type the material group identification for the section.

Unit Weight

Type the nominal weight of the section. The unit weight is defined in mass per length, pound per foot (lbm/ft).

Area

Type the cross-sectional area for the section. The area is defined in square inches or square millimeters.

Depth

Type the overall depth for the member (longer legs for angles). The depth is defined in inches or millimeters.

Width

Type the flange width. The width is defined in inches or millimeters.

Perimeter

Type the outside perimeter distance of the shape.

d

Type the other depth for the section (shorter legs). The depth is defined in inches or millimeters.

bf

Type the flange width. The width is defined in inches or millimeters.

tw

Type the web thickness. The thickness is defined in inches or millimeters.

tf

Type the flange thickness. The thickness is defined in inches or millimeters.

kdesign

Type the distance from the outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on the welded section.

kdetail

Type the distance from the outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on welded section.

Fy3p

Type the theoretical maximum yield stress (F'").

Ixx

Type the moment of inertia about the x-axis.

Zxx

Type the plastic section modulus about the x-axis.

Sxx

Type the elastic section modulus about the x-axis.

Rxx

Type the radius of gyration about the x-axis.

Iyy

Type the moment of inertia about the y-axis.

Zyy

Type the plastic section modulus about the y-axis.

Syy

Type the elastic section modulus about the y-axis.

Ryy

Type the radius of gyration about the y-axis.

J

Type the torsional moment of inertia.

Cw

Type the warping constant.

Wno

Type the normalized warping function.

Sw

Type the warping statical moment.

Qf

Type the statical moment at point in flange.

Qw

Type the statical moment at mid-depth of the section.

IsHollow

Specify if the cross-section is hollow or not. For this cross-section, the default value is False.

IsSymmetricAlongX

Specify if the cross-section is symmetrical along the local x-axis. For this cross-section, the default value is True.

IsSymmetricAlongY

Specify if the cross-section is symmetrical along the local y-axis. For this cross-section, the default value is True.