Change Toolbar - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D 2D Symbols

Language
English
Product
Intergraph Smart 3D
Subproduct
2D Symbols
Search by Category
Reference Data
Smart 3D Version
12 (2018)

The Change toolbar contains commands that you can use to modify elements of your symbol. You can activate the Change toolbar by using the View > Toolbars command.

Associative Offset - Draws an offset copy of a curve and applies an offset relation. For more information, see Associative Offset Command.

Move/Copy - Moves elements from one location to another. For more information, see Move Command.

Nudge - Moves an element or a select set in small increments. For more information, see Nudge Command.

Offset - Draws an offset copy of an element or a set of contiguous elements. For more information, see Offset Command.

Place Offset Curve by Hint - Places another curve next to the selected curve at the defined offset. This command places a hint handle so that the offset curve is always on the same side of the base curve as the hint handle. For more information, see Place Offset Curve by Hint.

Rotate - Rotates one or more elements. For more information, see Rotate Command.

Mirror - Mirrors one or more selected elements about a line that you define. For more information, see Mirror Command.

Align - Allows you to align two or more elements in a selection set. For more information, see Align Command.

Align Dimensions - Select linear dimensions and align them to a common point. For more information, see Align Dimensions Command.

Scale - Reduces or enlarges selected elements by a scale factor that you define. For more information, see Scale Command.

Rectangular Pattern - Copies selected elements in a rectangular pattern. For more information, see Rectangular Pattern Command.

Circular Pattern - Arranges selected elements in a circular pattern. For more information, see Circular Pattern Command.

Delete - Deletes the selected element and any relationships and dimensions that have been placed on it. For more information, see Delete Command.

Bring to Front - Moves a selected element to the front of the display order. For more information, see Bring to Front Command.

Send to Back - Moves a selected element to the back of the display order. For more information, see Send to Back Command.

Pull Up - Moves a selected element up one position in the display order. For more information, see Pull Up Command.

Push Down - Moves a selected element down one position in the display order. For more information, see Push Down Command.

Group - Binds elements so that you can locate, select, and manipulate them as a unit. For more information, see Group Command.

UnGroup - Removes elements from groups that were defined using the Group command. For more information, see Ungroup Command.