Name End Cut Points - Intergraph Smart 3D - Reference Data - Hexagon PPM

Intergraph Smart 3D 2D Symbols

Language
English
Product
Intergraph Smart 3D
Subproduct
2D Symbols
Search by Category
Reference Data
Smart 3D Version
13
SmartSketch Version
11

Specify points that map the web cut to the profile and the flange cut to the web cut.

Web Cut

  1. On the Cross Section Symbols toolbar, click Add Point Properties to display the Define Mapping Points dialog box.

  2. In the Point name box, choose WebCutPoint.

  3. Select a web cut point; the corresponding point highlights in the table.

  4. In the Attribute setting box, type the name. The name is the same as the bounded part curve on which the point lies. See Key Points for proper naming conventions. In the example, the correct names are Top, and Bottom.

  5. Click Apply.

  6. Repeat until all web cut points are named.

  7. Click OK.

Flange Cut

  1. On the Cross Section Symbols toolbar, click Add Point Names to display the Define Mapping Points dialog box.

  2. In the Point name box, choose FlangeCutPoint.

  3. Select a flange cut point; the corresponding point highlights in the table.

  4. In the Attribute setting box, type the name. See Key Points for proper naming conventions. In the example, the correct name is Profile.

  5. Click Apply.

  6. Repeat until all flange cut points are named.

  7. Click OK.