Size A - Separate Data Collector Server - PAS ICS Integrity - 7.3 - Installation & Upgrade - Intergraph

ICS Integrity Installation Guide

Language
English
Product
PAS ICS Integrity
Subproduct
ICS
Search by Category
Installation & Upgrade
PAS Version
7.3

Computer/Processor

Server-grade computer with four cores, 2 GHz processors or better

RAM

Standard 64-bit: 24 GB.

Enterprise 64-bit: 24 GB.

Hard Disk

Recommend 10,000 RPM drives or better.

C: - OS Drive at least 80 GB.

D: - Application Drive to be at least 300 GB.

Additional hard drive space might be required depending on site backup requirements.

Implementation of RAID-1 for the operating system and RAID 5, 6, or 10 for the Database Storage, Application, and Backup drives is recommended, following customer's data management policies.

RAID Controller should be high performance and cache enabled.

Operating System

Microsoft Windows Server 2008 R2, 2012, 2016, 2019, or 2022 (ANSI character set) Standard, Enterprise, or Datacenter Edition (64 bit).

Microsoft Installer v 3.1.

Microsoft .NET Framework 4.8 or later.

Microsoft .NET Framework should be installed prior to the installation of ODBC.NET Data Driver.

ODBC.NET Data Driver with Microsoft Data Access Components (MDAC) 2.8 or higher.

WebDAV Publishing should NOT be installed.

Network Connectivity

100 / 1000 MBPS or better Ethernet network adapter and TCP/IP protocol are required.

Email

Email server access from the Integrity Server is required for only emailing reports and diagnostics.

Integrity sends email using SMTP on TCP/IP Port 25. Some email applications block emails from going out to Port 25. This feature needs to be turned off in virus checking software on the Integrity Server.