EAM-54221 CLONE - Work Orders | Calibrations - Negative readings are not working in Calibration records entries |
|
Description |
|
Steps to reproduce : ======================== 1) Login an user in R5 group. 2) Go to Equipment > Assets > Create a new Asset. 3) Select the Asset > Navigate to Calibration Tab > Enter the values as shown below and click on Save. a) Select the Checkbox "Absolute" b) Enter the Device Tolerance as 3 and 3 c) Select the Checkbox "Instrument" 4) Go to Asset > Test Points tab > Enter the Test Point data as shown below and click on Save. a) Enter the Sequence field value as 1 b) Enter the Test Point value as -0.9 L c) Enter the Device Tolerance as 3 and 3 d) Select the Checkbox "Percentage" 5) Go to Asset > Record View > Right Click and then Click on Create WO to create new WO - Note down the WO ID. 6) Go to Work Orders > Locate the WO created in step 5 > Navigate to Calibration Tab 7) Click on Actions > Click on Import Test Points > Enter the values as shown below a) Enter the From value as Asset b) Select the newly Created Asset from Step 2 c) Click on Select > Import Test Points 8) Noticed that WO > Calibration > Device Tolerance populated as from -0.873 to -0.927 Expected Behavior : Device Tolerance to be populated as from -0.927 to -0.873 Actual result : Device Tolerance populated as from -0.873 to -0.927 |
EAM-54268 CLONE - Reservation Calendar - Multiple issues with dataspy when role security enabled. |