Four install parameters are used to define lists of IP addresses from which the server may be accessed:
-
IPLEAM
-
IPLCON
-
IPLMOB
-
IPLDBR
Format of an access list
-
An access list is a comma separated list of IP addresses.
-
Each item in the list is either a specific IP address, or a range of addresses
-
An individual address must be in the format: x.x.x.x, where ‘x’ is an integer from 0 to 255.
-
An IP address range must consist of two IP addresses separated by a dash: x.x.x.x-x.x.x.x
-
Example of an access list: 13.33.250.107-13.122.179.151, 16.92.101.88-16.193.94.152, 20.111.175.114-20.234.224.34, 22.197.127.66-23.11.0.192, 25.230.184.115-26.64.94.61, 28.22.242.168, 28.121.77.101, 32.156.138.7-32.218.139.233
Using a Default Access List
-
The IPLEAM access list serves both as the access list for web logons and as the default access list for all other logon types.
-
For example, if IP address validation is enabled for browser and mobile logons and both products use the same access list, the IPLMOB parameter may be left blank; in this case the IPLEAM list will be used for both products.