Properties (Flange Pair) - CAESAR II - Help

CAESAR II Users Guide

Language
English
Product
CAESAR II
Search by Category
Help
CAESAR II Version
13

Flange Dimension Lookup

Opens the Flange Dimension Lookup Dialog, which allows you to define general flange properties for weld neck flanges. The software then fills in flange and gasket dimensions with the closest standard size.

Label

Defines a label for the flange assembly. The software defines the value as Flange Pair by default, but you can change it.

Description

Specifies a description for the component. This is an optional property.

EN 13445-3 Annex G

Defines the use of the Annex G alternative method for joints with spacer-seated flanges.

Select to use EN 13445-3:2014+A2:2016 (E).

Clear to use EN 1591-1:2001+A1:2009/AC:2010.

Face ID (Fid)

Defines Fid, the inner diameter of the flange face.

Adapted from Figure 8, EN 1591-1:2001+A1, Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method

If you use Flange Dimension Lookup , the software defines a value for this field.

Face OD (Fod)

Defines Fod, the outer diameter of the flange face.

Adapted from Figure 8, EN 1591-1:2001+A1, Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method

If you use Flange Dimension Lookup , the software defines a value for this field.

Bolt Circle Diameter (d3)

Defines d3, the diameter of the bolt circle.

Adapted from Figure 8, EN 1591-1:2001+A1, Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method

If you use Flange Dimension Lookup , the software defines a value for this field.

Pierced Bolt Hole Diameter (d5)

Defines d5, the diameter of the bolt holes in the flange.

Adapted from Figure 8, EN 1591-1:2001+A1, Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation method