Tutorial B - Check equipment and redesign a piping system - CAESAR II - Reference Data

This tutorial guides you through equipment checks on the pump and the redesign of the system created in Tutorial A - Create a typical piping system.

Steps in this tutorial

1. Review piping system loads on the pump

2. Evaluate pump discharge nozzle loads

3. Review the model

4. Incorporate flexibilities at the vessel and nozzle intersection

5. Run a new static analysis for WRC 297 loads

6. Review static output reports for the new analysis

7. Re-evaluate pump discharge nozzle loads

8. Redesign the piping system

9. Rerun the static analysis

10. Conclusions