General
Dimensions
Landing Length
Specify the length of landings on the stair.
Grating Template
Select a template from those available in the Structure Project file (.sprj).
Landing Top
Select this option to add a landing at the top of the stair.
Landing Bottom
Select this option to add a landing at the bottom of the stair.
Toe Plate
Select this option to add toe plates to the steps.
Max Rise
Define the maximum vertical distance between each step surface.
Run
Define the horizontal distance between the front of each step.
Spherical
Offset Height of Top Platform
Define the offset distance between the top platform and the vessel.
Height
Define the total rise distance of the stair.
Offset Surface
Define the offset distance between the stair and the vessel.
Vessel Diameter
Define the diameter of the vessel.
Width
Define the width of the steps in the stair.
Members
Treads
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Landing
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.
Toe Plate
Shape
Select a member shape from those available in the Project file.
Section Data Table
Select a section data table from those available in the data tables for the member type. The list changes based on the Section Type setting and populates the Member Size list.
Member Size
Select a size from those available in the data tables for the member type.
Material
Select a material from those available in the Project file.
Angle
Specifies the angle, in degrees, by which the cross-section is rotated about the member axis.
Cardinal Point
Specifies the relative position of the structural cross-section to the member placement line.
Reflect
Reflects or mirrors the cross-section about the member's local z-axis.