Angles - CADWorx - Reference Data

CADWorx Structure Editor

Language
English
Product
CADWorx
Subproduct
Structure Editor
Search by Category
Reference Data
CADWorx Version
20.2
CADWorx Structure Version
4.2

Specifies the angles properties. To view the properties:

  1. Click the plus (+) sign next to Angles to expand the shape category.

  2. Double-click the data table.

Fields

MEMBER - Member

Specifies the member name based on the depth of the steel member and the weight.

EDI - Electronic Data Interchange

Specifies the Electronic Data Interchange name for the member.

Depth - Depth

Specifies the depth of the steel member from flange to flange. The depth is defined in inches or millimeters.

Width - Width

Specifies the width of the flange on the steel member. The width is defined in inches and millimeters.

tw - Web Thickness

Specifies the web thickness of the steel member. The thickness is defined in inches or millimeters.

d - Web Depth

Specifies the depth of the web on the steel member. The depth is defined in inches or millimeters.

tf - Flange Thickness

Specifies the thickness of the flange for the steel member. The thickness is defined in inches or millimeters.

bf - Flange Width

Specifies the width of the flange for the steel member. The width is defined in inches or millimeters.

kdetail - Distance to Web Toe Fillet

Specifies the distance from the outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on welded steel member.

kdesign - Distance to Web Toe Fillet

Type the distance from the outer face of the flange to the web toe of the fillet of the rolled shape or the equivalent distance on the welded steel member.

UnitWeight - Unit Weight

Specifies the weight of the steel member per unit length.

JUA Fields

xp - Plastic neutral axis

Specifies the distance from the designated edge of angle to its plastic neutral axis (PNA) along the local x-axis. The distance is defined in inches or millimeters.

yp - Plastic neutral axis

Specifies the distance from the designated edge of angle to its plastic neutral axis (PNA) along the local y-axis.

Design Fields

Perimeter - Perimeter

Specifies the outside perimeter for the steel member.

Area - Area

Specifies the cross-sectional area for the steel member.

CentroidX - Centroid X

Specifies the location of the centroid along the local x-axis. The location is defined in inches or millimeters.

CentroidY - Centroid Y

Specifies the location of the centroid along the local y-axis. The location is defined in inches or millimeters.

Ixx - Moment of Inertia about X

Specifies the moment of inertia for the member's local x-axis.

Iyy - Moment of Inertia about Y

Specifies the moment of inertia for the section's local y-axis.

Sxx - Elastic Section Modulus about X

Specifies the section modulus for the member's local x-axis.

Syy - Elastic Section Modulus about Y

Specifies the section modulus for the member's local y-axis.

J - Torsional Moment of Inertia

Specifies the torsional moment of inertia for the member.

Cw - Warping Constant

Specifies the warping constant for the member.

H - Flexural Constant

Specifies the flexural constant for the member.

ro - Polar Radius of Gyration about Shear Center

Specifies the polar radius of gyration about the shear center.

Rxx - Radius of Gyration about X

Specifies the radius of gyration for the member's local x-axis.

Ryy - Radius of Gyration about Y

Specifies the radius of gyration for the member's local y-axis.

Zxx - Plastic Section Modulus about X

Specifies the plastic section modulus for the member's local x-axis.

Zyy - Plastic Section Modulus about Y

Specifies the plastic section modulus for the member's local y-axis.

IsHollow - Is Hollow

Specify if the cross-section is hollow or not.

IsSymmetricAlongX - Is Symmetric About X

Specify if the cross-section is symmetrical along the local x-axis.

IsSymmetricAlongY - Is Symmetric About Y

Specify if the cross-section is symmetrical along the local y-axis.

Bolt Gage Fields

lsg - Long Side Gage

Specifies the bolt gage for the long side when there is one bolt row.

lsg1 - Long Side Gage 1

Specifies the gage distance to the first bolt row on the long side when there are two bolt rows.

lsg2 - Long Side Gage 2

Specifies the gage distance between the first and second bolt rows on the long side when there are two bolt rows.

ssg - Short Side Gage

Specifies the bolt gage for the short side when there is one bolt row.

ssg1 - Short Side Gage 1

Specifies the gage distance to the first bolt row on the short side when there are two bolt rows.

ssg2 - Short Side Gage 2

Specifies the gage distance from the first bolt row to the second bolt row on the short side when there are two bolt rows.

Custom Data

Enables you to input custom fields using the New Field Dialog Box.

Picture Description

Displays an image of the member when available.

Angles Structure Editor_PIC_DESC

  1. tw (Web Thickness)

  2. tf (Flange Thickness)

  3. Width

  4. Depth