Create New Assembly - CADWorx - Help

CADWorx Plant

Language
English
Product
CADWorx
Subproduct
Plant
Search by Category
Help
CAESAR II Version
12
I-Configure Version
6.0(2016)
Smart Isometrics Version
8
Spoolgen Version
10
CADWorx Version
20.1 (2020 R1)
CADWorx Structure Version
2020 R1 (4.1)

Controls parameters for creating new assemblies that you can save to the drawing or to the .psl file.

Add Parts

Enables you to add parts for the new pipe support assembly, and displays the Add Parts pane in the CADWorx Pipe Support View. For more information, see Add Parts.

Edit Parts

Enables you to edit parts of a pipe support assembly, and displays the Edit Parts pane in the CADWorx Pipe Support View. For more information, see Edit Parts

Delete Selected Part

Enables you to delete a selected assembly.

View Part Data Table

Displays the data table for the selected part. For information on each property, see PipeSupport in the CADWorx Spec Editor Users Guide.

Parts

Displays the support components that you can use to make an assembly.

Properties

Enables you to specify a group name, a name, and the size ranges for the new pipe support assembly. Click + to expand and view these options.

  • Group Name

Specifies the group name for the new pipe support assembly. This name displays in the CADWorx Support Modeler palette.

  • Name

Specifies the name of the pipe support assembly. This name displays under the group name in the CADWorx Support Modeler palette.

  • Size Range

Specifies the sizes for the new pipe support assembly.

  • CAESAR II Type

Specifies the restraint type of the support for use in CAESAR II pipe stress analysis.

Insulation Options

Enables you to select insulation options for the new pipe support assembly. Click + plus to expand and view these options.

  • Increase support size if component is insulated

Automatically selects a larger size support component based on the insulation thickness. For example, a six-inch nominal size pipe (6.625 inch actual OD) has four-inch thick insulation (14.625 inch OD). This makes the total pipe diameter 6.625 inch actual OD plus 8 inch insulation OD. The software determines the support by looking it up in the data file.

  • Use next larger size if exact size is not available

Specifies that if the calculated support is not available in the data file, the next larger size support is selected.

BOM

Enables you to set the bill of material sort, type, and CAESAR II Type for the new pipe support assembly you create. You can use the plus to expand and view these options.

  • Sort

Locates a component item in the bill of material schedule. Type the needed value. Type 0 to place the item first in the schedule. Type 999 to place the item last. If the same sort numbers are used for different components, they are placed in alphabetical order.

  • Type

Specifies the bill of material type. Select Fabrication, Erection, Offshore, or Misc.

Isogen

Enables you to set the Isogen details for the new pipe support assembly you create. You can use the plus to expand and view these options.

  • Identifier

Specifies the identifier value Isogen uses for an isometric drawing. For more information, see SKEY Information.

  • SKEY

Specifies the SKEY value Isogen uses for an isometric drawing. If you do not specify an SKEY value, then CADWorx uses the default Isogen Support symbol during Isometric Drawing generation. For more information, see SKEY Information.

  • Message Type

Specifies the format of text displayed with the support.

  • Message Text

Specifies text displayed with the support.

  • Detail Sketch

Specifies a .DWG CAD platform file containing details about the support. Select the file from the Select detail sketch file dialog box.

Description

  • Long

Describes the pipe support assembly. The bill of materials uses this description. Clickto edit the description format.

  • Short

Specifies the abbreviated description for the pipe support assembly. Clickto edit the description format.

  • Tag

Specifies an optional tag description for the pipe support assembly. Clickto edit the description format.

  • Part Number

Specifies the part number information of the pipe support assembly. Clickto edit the description format.

For more information on assembly description formats, see Pipe Support Long, Short, Tag, and Part Number Format Dialog Boxes in the CADWorx Spec Editor Users Guide.

  • Notes

Specifies any notes attached to the pipe support assembly.

Save to Library

Saves to the library displayed in Libraries and Assembly Data.

Save to Model

Saves to the current model only.