-
Click Start > All Programs > CADWorx > Isogen > I-Configure > I-Configure.
I-Configure opens.
-
In the Project View panel, select the appropriate isometric directory and project.
-
Under the active project, select the appropriate isometric drawing style.
-
Click Edit in the Properties panel.
The Isogen Configuration Home screen displays.
-
Click Reports in the Drawing Manager pane.
The Configuration view opens and displays the Reports panel.
-
Expand Report Types.
-
Double-click Repeatability return to open the data grid.
The Reports panel displays the Repeatability return options.
-
Expand File Formatting.
The File Formatting properties display.
-
Select Revised ASCII from the Content list.
-
Use the Part Numbers, Split Points, Start Point, and Weld Numbers check boxes control the information that displays in the drawing.
-
Set Spool Identifier to Numeric or Alphabetic.
-
In the Report Location box, type the name and full path location of the report file. Alternatively, click the Report Location browse button
and navigate to the appropriate file.
-
Click
to update the active style file with the new property settings.
-
Select Home in the
menu to return to the Home screen.
-
Close Isogen Configuration.
-
Verify the Reports displays in the Properties panel, and that Value is set to REPEATABILITY-RETURN.
For more information on Reports, see Report Definition Panel in the Isogen Configuration User's Guide.
-
Click Export Style
on the I-Configure horizontal toolbar.
-
Open a drawing, and then click Setup
.
-
Select Configuration Settings.
-
Set IsogenSetting to 1, 2, or, 3. For more information, see IsogenSetting.
-
Run Isogen Out
. For more information, see Isogen Out.
Enable the RepeatFile for I-Configure 2012
-
Open I-Configure, select an isometric drawing style, and then select the Detail tab.
-
Expand Supplementary in the list, and then select RepeatFile.
-
In the Property panel, set Enabled value to True.