LayerByLineNumber - CADWorx - Help

CADWorx Plant

Language
English
Product
CADWorx
Subproduct
Plant
Search by Category
Help
CAESAR II Version
12
I-Configure Version
6.0(2016)
Smart Isometrics Version
8
Spoolgen Version
10
CADWorx Version
20.1 (2020 R1)
CADWorx Structure Version
2020 R1 (4.1)

Default value: 0
Allowed values: 0, 1, 2, 3, and 4

Specifies the layers for component placement.

You can use UPDATELAYERBYLINENUMBERDATA to update a line number with the current LayerByLineNumber setting. If you set LayerByLineNumber to 0 and change it to 2, then run UPDATELAYERBYLINENUMBERDATA, the line number you select updates based on the settings defined below.

  • 0

    1. Solid:

      1. The layer name of the solid is based on PRJ layer entry.

      2. "_" is placed in front of the layer name: For example: 150 spec is on layer _150.

      3. The color of the solid is set according to the table below:

Component level color PRJ

Spec level color PRJ

Spec layer color in model DWG file

Entity Color Set to By Layer

Same Color

Same Color

Same Color

Entity Color Set to component level PRJ

Same Color

Same Color

Different Color

Entity Color Set to By Layer

Same Color

Different Color

Same Color

Entity Color Set to component level PRJ

Same Color

Different Color

Different Color

b. Center line

  1. The layer name of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.

  2. The color of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.

  3. The line type of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.

  4. Any changes to Setup > Layers > Centerline Settings changes the existing centerlines in the DWG file.

  • 1

  1. Solid

  1. The layer name of the solid and center line is based on the Line Number name.

  2. The color of the solid and center line is based on the CAD platform Layer settings.

  3. The line type of the solid and center line is based on the CAD platform Layer settings.

  4. Any changes made to the line number using CEDIT do not change the layer the solid and center line is on. Use the CAD platform Layer command to change the layer of an existing solid and center line in the DWG file.

  1. Centerline: Same implementation as Solid.

  • 2

  1. Solid:

  1. The layer name of the solid is based on the Line Number name.

  2. The color of the solid is based on the CAD platform Layer settings.

  3. The line type of the solid is based on the CAD platform Layer settings.

  4. Any changes made to the line number using CEDIT do not change the layer the solid is on. Use the CAD platform Layer command to change the layer of an existing solid in the DWG file.

  1. Centerline:

  1. The layer name of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.

  2. The color of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.

  3. The line type of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.

  4. Any changes made to the line number using CEDIT do not change the layer the solid is on. Use the CAD platform Layer command to change the layer of an existing centerline in the DWG File.

  • 3

  1. Solid

  1. The layer name of the solid and center line is based on the Line Number name.

  2. The color of the solid and center line has the same implementation for solid color as LayerByLineNumber = 0 setting shown in the table above.

  3. The line type of the solid and center line is based on the CAD platform Layer settings.

  4. Any changes made to the line number using CEDIT do not change the layer the solid and center line is on. Use the CAD platform Layer command to change the layer of an existing solid and center line in the DWG file.

  1. Centerline: Same implementation as the Solid.

  • 4

  1. Solid:

  1. The layer name for solid is based on the Line Number name.

  2. The color of the solid has the same implementation for solid color as LayerByLineNumber = 0 setting shown in table above.

  3. The line type of the solid is based on the CAD platform Layer settings.

  4. Any changes made to the line number using CEDIT do not change the layer the solid is on. Use the CAD platform Layer command to change the layer of an existing solid in the DWG file.

  1. Centerline:

  1. The layer name of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.

  2. The color of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.

  3. The line type of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.

  4. Any changes made to the line number using CEDIT do not change the layer the solid is on. Use the CAD platform Layer command to change the layer of an existing centerline in the DWG file.