Create a graphic overlay from a drawing for a valve - CADWorx - Help

CADWorx Plant

Language
English
Product
CADWorx
Subproduct
Plant
Search by Category
Help
Smart Isometrics Version
8
Spoolgen Version
10
CADWorx Version
20.2
CADWorx Structure Version
4.2
  1. Create a drawing to use as a graphic overlay on a valve, and then save and close the drawing. If you already have a valve drawing created, you can select that drawing in the following procedure.

    Overlay Drawing Valve

    You must set a specification before you can run this command.

  2. Click Graphics Overlay Editor Graphic Overlay Editor, or type COMPONENTDWGBLOCKEDIT on the command line, and then press ENTER.

    The Graphics Overlay Editor dialog box displays.

  3. Select a valve type.

  4. Click Icon for Selection Graphic Overlays in the DWGNAME box next to the size you want to assign for the graphic overlay.

  5. Select Select Block (or Drawing).

    The Select Drawing dialog box displays.

  6. Select a drawing that contains a graphic overlay block, and then click Open.

  7. Click Apply.

  8. Click OK.

Next, see Display graphic overlays of valve components in the 3D model.