Plant menu: Toolbars > Flgd/BW Valves
-
The commands on the Flgd/BW Valves toolbar can be used for modeling in 3D or 2D mode depending on how you define the drawing mode. For more information, see 3D Modeling versus 2D Modeling.
-
It is possible to add multiple pressure and ratings to valves in the Specification Editor. For more information, see New and Edit Component Pane in the CADWorx Spec Editor User's Guide.
-
If you draw a valve with multiple ratings in CADWorx Plant and then attach a flange, the software prompts you when the flange and the valve rating do not match. You can select Yes to override and insert the flange. Optionally, select No, and then insert a flange with a matching rating.
Command Name |
Command Line |
|
---|---|---|
Gate - Places a gate valve component in the X-Y plane. For more information, see Gate Valve. |
GATF |
|
Ball - Places a ball valve component in the X-Y plane. For more information, see Ball Valve |
BALF |
|
Globe - Places a globe valve component in the X-Y plane. For more information, see Globe Valve. |
GLBF |
|
Plug - Places a plug valve component in the X-Y plane. For more information, see Plug Valve. |
PLUF |
|
Check - Places a check valve component in the X-Y plane. For more information, see Check Valve. |
CHKF |
|
Butterfly - Places a butterfly valve component in the X-Y plane. For more information, see Butterfly Valve. |
BFYF |
|
Diaphragm - Places a diaphragm valve and flange gasket component in the X-Y plane. For more information, see Diaphragm Valve. |
DIAF |
|
Rotary - Places a rotary valve component in the X-Y plane. For more information, see Rotary Valve. |
ROTF |
|
Dual Check - Places a dual check valve and flange gasket components in the X-Y plane. For more information, see Dual Check Valve. |
DCHF |
|
Control - Places a control valve component in the X-Y plane. For more information, see Control Valve. |
CNTF |
|
3 Way Plan - Places a three-way valve component in the X-Y plane. For more information, see 3-Way Plan Valve. |
3VF |
|
4 Way Plan - Places a four-way valve component in the X-Y plane. For more information, see 4-Way Plan Valve. |
4VF |
|
Relief Side - Places a 90 degree pressure relief valve in the X-Y plane. For more information, see Relief Side Valve. |
RELF |
|
Angle Top - Places a 90 degree angle valve in the X-Y plane. For more information, see Angle Top Valve. |
ANGF |
The commands in the table below are designed for modeling in 2D.
Command Name |
Command Line |
|
---|---|---|
3 Way Side - Places a three-way valve component with the valve branch normal to the X-Y plane. For more information, see 3-Way Side Valve |
H3VF |
|
3 Way Vertical - Places a three-way valve component with the main normal to the X-Y plane. For more information, see 3-Way Vertical Valve. |
V3VF |
|
4 Way Side - Places a four-way valve component with the valve branches normal to the X-Y plane. For. more information, see 4-Way Side Valve |
H4VF |
|
Relief Top - Places a 90 degree pressure relief valve with the relief end normal to the X-Y plane. For more information, see Relief Top Valve |
HRELF |
|
Pressure Top - Places a 90 degree pressure relief valve with the pressure end normal to the X-Y plane. For more information, see Pressure Top Valve. |
VRELF |
|
Angle Side - Places a 90 degree angle valve in the X-Y plane. For more information, see Angle Side Valve. |
HANGF |