Plant menu: Toolbars > Buttweld
The commands on the Buttweld toolbar can be used for modeling in 3D or 2D mode depending on how you define the drawing mode. For more information, see 3D Modeling versus 2D Modeling.
Command Name |
Command Line |
|
---|---|---|
Pipe - Places a butt-welded pipe component. For more information, see Pipe. |
PIPW |
|
Plan 90 LR Ell - Places a 90 degree long radius elbow in the X-Y plane. For more information, see Plan 90 LR Ell. |
90LR |
|
Plan 90 SR Ell - Places a 90 degree short radius elbow in the X-Y plane. For more information, see Plan 90 SR Ell. |
90SR |
|
Plan 45 Ell - Places a 45 degree elbow in the X-Y plane. For more information, see Plan 45 Ell. |
45LR |
|
Plan 90 Reducing Ell - Places a 90 degree reducing elbow in the X-Y plane. For more information, see Plan 90 Reducing Ell. |
90RD |
|
Plan Tee - Places a straight tee in the X-Y plane. For more information, see Plan Tee. |
TESW |
|
Plan Reducing Tee - Places a straight reducing tee in the X-Y plane. For more information, see Plan Reducing Tee. |
TERW |
|
Plan 180 LR Return - Places a 180 degree long radius return in the X-Y plane. For more information, see Plan 180 LR Return. |
18LR |
|
Plan 180 SR Return - Places a 180 degree short radius return in the X-Y plane. For more information, see Plan 180 SR Return. |
18SR |
|
Conc Reducer - Places a concentric reducer component in the X-Y plane. For more information, see Conc Reducer. |
CONC |
|
Ecc Reducer - Places an eccentric reducer component in the X-Y plane. For more information, see Ecc Reducer. |
ECC |
|
Cap - Places a pipe cap in the X-Y plane. For more information, see Cap. |
CAPW |
|
Plan Cross - Places a four-way straight cross in the X-Y plane. For more information, see Plan Cross. |
CRSW |
|
Plan Reducing Cross - Places a four-way reducing cross in the X-Y plane. For more information, see Plan Reducing Cross. |
CRRW |
|
Plan Lateral - Places a 45 degree lateral tee in the X-Y plane. For more information, see Plan Lateral. |
LATW |
|
Miters - Places a mitered pipe component in the X-Y plane. For more information, see Miters. |
MPIP |
|
Rolled Pipe - Places a free-form pipe component, such as a hose or flexible connection. For more information, see Rolled Pipe. |
SPIP |
|
Adjustable Bend - Places an adjustable pipe bend. For more information, see Adjustable Bend. |
BENT |
|
90 LR Ell - Places a 90 degree long radius elbow with the end rolled at a 45 degree angle from the X-Y plane. For more information, see 90 LR Ell. |
R90LR |
|
90 SR Ell - Places a 90 degree short radius elbow with the end rolled at a 45 degree angle from the X-Y plane. For more information, see 90 SR Ell. |
R90SR |
|
45 LR Ell - Places a 45 degree elbow with the end rolled at a 45 degree angle from the X-Y plane. For more information, see 45 LR Ell. |
R45LR |
|
Tee - Places a tee with the branch rolled at a 45 degree angle from the X-Y plane. For more information, see Tee. |
RTESW |
|
Plan 11.25 Ell - Places an 11.25 degree elbow in the X-Y plane. For more information, see Plan 11.25 Ell. |
11LR |
|
Plan 22.5 Ell - Places a 22.5 degree elbow in the X-Y plane. For more information, see Plan 22.5 Ell. |
22LR |
|
Plan Wye - Places a wye in the X-Y plane. For more information, see Plan Wye. |
YB |
The commands in the table below are designed for modeling in 2D.
Command Name |
Command Line |
|
---|---|---|
Side 90 LR Ell - Places a 90 degree long radius elbow normal to the X-Y plane. For more information, see Side 90 LR Ell. |
H90LR |
|
Side 90 SR Ell - Places a 90 degree short radius elbow normal to the X-Y plane. For more information, see Side 90 SR Ell. |
H90SR |
|
Side 45 Ell - Places a 45 degree elbow normal to the X-Y plane when the previous or next run is horizontal to the X-Y plane. For more information, see Side 45 Ell. |
H45LR |
|
Vert 45 Ell - Places a 45 degree elbow normal to the X-Y plane when the previous or next run is vertical to the X-Y plane. For more information, see Vert 45 Ell. |
V45LR |
|
Side 90 Reducing Ell - Places a 90 degree reducing elbow normal to the X-Y plane. For more information, see Side 90 Reducing Ell. |
H90RD |
|
Side Tee - Places a straight tee with the branch normal to the X-Y plane. For more information, see Side Tee. |
HTESW |
|
Vert Tee - Places a straight tee with the main normal to the X-Y plane. For more information, see Vert Tee. |
VTESW |
|
Side Reducing Tee - Places a straight reducing tee with the branch normal to the X-Y plane. For more information, see Side Reducing Tee. |
HTERW |
|
Vert Reducing Tee - Places a straight reducing tee with the main normal to the X-Y plane. For more information, see Vert Reducing Tee. |
VTERW |
|
Side 180 LR Return - Places a 180 degree long radius return normal to the X-Y plane with the return ends on the X-Y plane. For more information, see Side 180 LR Return. |
H18LR |
|
Vert 180 LR Return - Places a 180 degree long radius return normal to the X-Y plane with the return ends also normal to the X-Y plane. For more information, see Vert 180 LR Return. |
V18LR |
|
Side 180 SR Return - Places a 180 degree short radius return normal to the X-Y plane with the return ends on the X-Y plane. For more information, see Side 180 SR Return. |
H18SR |
|
Vert 180 SR Return - Places a 180 degree short radius return normal to the X-Y plane with the return ends also normal to the X-Y plane. For more information, see Vert 180 SR Return. |
V18SR |
|
Side Cross - Places a four-way straight cross with the branch normal to the X-Y plane. For more information, see Side Cross. |
HCRSW |
|
Side Reducing Cross - Places a four-way reducing cross with the reducing branch normal to the X-Y plane. For more information, see Side Reducing Cross. |
HCRRW |
|
Vert Reducing Cross - Places a four-way reducing cross with the main branch normal to the X-Y plane. For more information, see Vert Reducing Cross. |
VCRRW |
|
Side Lateral - Places a 45 degree lateral tee in the X-Y plane with the branch in the X-Z or Y-Z plane. For more information, see Side Lateral. |
HLATW |
|
Vert Lateral - Places a 45 degree lateral tee with the main normal to the X-Y plane. For more information, see Vert Lateral. |
VLATW |
|
Side 11.25 Ell - Places an 11.25 degree elbow normal to the X-Y plane. For more information, see Side 11.25 Ell. |
H11LR |
|
Vert 11.25 Ell - Places an 11.25 degree elbow normal to the X-Y plane. For more information, see Vert 11.25 Ell. |
V11LR |
|
Side 22.5 Ell - Places a 22.5 degree elbow normal to the X-Y plane. For more information, see Side 22.5 Ell. |
H22LR |
|
Vert 22.5 Ell - Places a 22.5 degree elbow normal to the X-Y plane. For more information, see Vert 22.5 Ell. |
V22LR |
|
Side Wye - Places a wye on the X-Y plane with the branches normal to the X-Y plane. For more information, see Side Wye. |
HYB |
|
Vert Wye - Places a wye normal to the X-Y plane with the branches also normal to the X-Y plane. For more information, see Vert Wye. |
VYB |