Command line: ENGENERIC
Draws a generic nozzle object in the drawing. You can use the information later in bill of material extraction, labeling, and so forth. A project, a specification, and a Main size must be set before you can draw a generic nozzle.
Description
Specifies the description of the nozzle generic attachment.
Equipment Name
Specifies the name of the equipment nozzle generic attachment that you are creating or editing.
Size
Specifies the nominal size of the generic nozzle. You can edit the size with the list.
Flange Rating
Specifies the flange rating for the nozzle generic attachment that you are creating or editing.
Flange Thickness
Specifies the flange thickness for the nozzle generic attachment that you are creating or editing.
Flange Type
Specifies the flange type for the nozzle generic attachment that you are creating or editing.
Applicable Gaskets
Specifies the applicable gasket for the component based on the selection code. The value that you choose in the Applicable Gaskets list determines the gasket that inserts when you place a component pair that requires a gasket, such as flanged components, clamped components, flanged end-types, and clamped end types. You can either type the code in the Applicable Gaskets box, or select an available code from the list. The Applicable Gaskets option only displays when the component allows a gasket. To assign selection codes, see Assign selection codes to components without catalog defaults.
Applicable Bolts
Specifies the applicable bolt for the component based on the selection code. The value that you choose in the Applicable Bolts list determines the bolt that inserts when you place a component pair that requires a bolt, such as flanged components, clamped components, flanged end-types, and clamped end types. You can either type the code in the Applicable Bolts box, or select an available code from the list. The Applicable Bolts option only displays when the component allows a bolt. To assign selection codes, see Assign selection codes to components without catalog defaults.
Layer
Specifies the layer for the generic nozzle.
Color
Specifies the color for the generic nozzle. You can use the Select Color option from the list to open the Select Color dialog box, and select any color.
Nozzle insertion point
Enables you to select the face end and buttweld end points for the nozzle generic attachment.
-
Buttweld end Point
Specifies the buttweld end point with a green arrow on the nozzle generic attachment.
-
Face end Point
Specifies the face end point with a red arrow on the nozzle generic attachment.
Specify On-Screen
Enables you to specify the face end and buttweld end points on the nozzle generic attachment on screen by the X, Y, and Z. These coordinates can also be entered manually. Specifying the end and middle points sets those points for the routing point for the next nozzle.
Remove
Removes the existing xdata from the generic nozzle. Alternatively, you can use ENGENERICREMOVE to remove data from any generic nozzle.
What do you want to do?