Insert multiple pipe supports - CADWorx - Help

CADWorx Plant

Language
English
Product
CADWorx
Subproduct
Plant
Search by Category
Help
Isogen Version
15
Smart Isometrics Version
8
Spoolgen Version
10
CADWorx Version
22
  1. Set a specification. For more information, see Set Specification & Size Dialog Box.

    The pipe support list populates with the pipe support information from the specification.

  2. If needed, change the size of a pipe support using Main Size.

  3. Select the Library and Assembly Data or use the default.

  4. Under Insert Options, select the Multiple check box.

  5. Expand the support option, and then select a pipe support from the list.

  6. Select an insertion point on the pipe.

  7. Specify an end point on the pipe.

    OR

    The Pipe Support Data dialog box displays. This dialog box only displays when optional items are available.

    Specify the data, and then click OK.

    Specify an end point on the pipe.

  8. Specify the distance between each pipe support by entering the value on the command line, and then press ENTER.

  9. Specify a rotation around the pipe and the length of the pipe support.

    The software places the pipe supports in the model.

If you insert an assembly with overlapping steel members, the software prompts you to select the coping members, and then select the coping boundary. Select the member to trim, and then select the member that acts as the coping boundary.