|
Function
|
System Response
|
|
Prompt 1
|
Pick left justified insertion point: pick a point in the drawing
Rotation angle: pick a direction or enter angle
Enter scale: type a string on the command line, and press ENTER
|
|
Prompt 2
|
Pick left justified insertion point: pick point in the drawing
Rotation angle: pick direction or enter angle
Enter mark: type a string on the command line, and press ENTER
Enter scale: type a string on the command line, and press ENTER
|
|
Prompt 3
|
Pick left justified insertion point: pick a point in the drawing
Rotation angle: pick a direction in the drawing or enter angle
Enter mark: type a string on the command line, and press ENTER (ex: A)
Enter drawing: type a string on the command line, and press ENTER (ex: 106)
Enter scale: type a string on the command line, and press ENTER (ex: 3/8"=1'-0")
|
|
Prompt 4
|
Pick insertion point: pick a point in the drawing
Section direction: pick a direction in the drawing
Projection direction: pick a direction in the drawing
Enter mark: type a string on the command line, and press ENTER (ex: A)
|
|
Prompt 5
|
Pick insertion point: pick a point in the drawing
Section direction: pick a direction in the drawing
Projection direction: pick a direction in the drawing
Enter mark: type a string on the command line, and press ENTER (ex: A)
Enter drawing: type a string on the command line, and press ENTER ( ex: 106)
|
|
Prompt 6
|
Pick insertion point: pick a point in the drawing
Section direction: pick a direction in the drawing
Projection or other direction: pick a direction in the drawing
|
|
Prompt 7
|
Pick object to mark: pick an object in the drawing
Pick mark location: pick point in the drawing
Enter mark: type a string on the command line, and press ENTER (ex: A)
|
|
Prompt 8
|
Pick object to mark: pick an object in the drawing
Pick mark location: pick a point in the drawing
Enter mark: type a string on the command line, and press ENTER (ex: A)
Enter drawing: type a string on the command line, and press ENTER (ex: 106)
|
|
Prompt 9
|
Pick left end point: pick a point in the drawing
Pick right end point: pick a point in the drawing
Enter title: type a string on the command line, and press ENTER (ex: ELEVATION NORTH)
Enter scale: enter a string (ex: 3/8"=1'-0")
|
|
Prompt 10
|
Pick instrument to label: pick a point in the drawing
Pick mark location: pick a point in the drawing
Enter first level label: type a string on the command line, and press ENTER (ex: SDV)
Enter second level label: type a string on the command line, and press ENTER (ex: 1)
|
|
Prompt 11
|
Pick instrument to label: pick a point in the drawing
Pick mark location: pick a point in the drawing
Enter first level label: type a string on the command line, and press ENTER (ex: PI)
Enter second level label: type a string on the command line, and press ENTER (ex: 106)
Enter third level label: type a string on the command line, and press ENTER (ex: B)
|
|
Prompt 12
|
Pick center insertion point: pick a point in the drawing
Rotation angle: pick a direction or enter angle
|
|
Prompt 13
|
Pick center insertion point: pick a point in the drawing
|
|
Prompt 14
|
Pick center insertion point: pick a point in the drawing
Pick direction: pick a direction
|
|
Prompt 15
|
Pick insertion point: pick a point in the drawing (not center insertion, outside edge)
Pick direction: pick a direction in the drawing
Enter mark: type a string on the command line, and press ENTER (ex: 101)Weld
|
|
Prompt 16
|
Pick leader start point: pick a point in the drawing
Pick intermediate point: pick a point in the drawing
Pick direction for tail: pick a direction in the drawing
|
|
Prompt 17
|
Pick insertion point: pick a point in the drawing
Pick rotation: pick a direction in the drawing
|
|
Prompt 18
|
Pick insertion point: pick a point in the drawing
|
|
Prompt 19
|
Pick insertion point on line: pick a point in the drawing
Pick rotation: pick a direction in the drawing
|
|
Prompt 20
|
Pick location: pick a point in the drawing
Pick rotation or [Up/Down/Roll/mirrorX/mirrorY/mirrorZ]: select an option or pick the rotation
|