Plant menu: Toolbars > Thrd/SW Fittings
The Command Line column in the table below shows the command for the socket weld component and the equivalent threaded component. Use the Threaded and Socket Weld commands on the Setup Size/Spec Panel to switch between these two modes.
The commands on the Thrd/SW Fittings toolbar can be used for modeling in 3D or 2D mode depending on how you define the drawing mode. For more information, see 3D Modeling versus 2D Modeling.
Command Name |
Command Line |
|
---|---|---|
Thrd/SW Pipe - Places a threaded/socket pipe component. For more information, see Thrd/SW Pipe. |
PIPF |
|
Nipple - Places a pipe nipple in the X-Y plane. For more information, see Nipple. |
NIP |
|
Tube - Attaches tubing to any 2D or 3D polyline. For more information, see Tube. |
TUBE |
|
Thrd/SW 90 Ell Plan - Places a 90 degree threaded/socket elbow in the X-Y plane. For more information, see Thrd/SW 90 Ell Plan. |
90S/90T |
|
Thrd/SW 90 Street Ell Plan - Places a 90 degree threaded/socket street elbow in the X-Y plane. For more information, see Thrd/SW 90 Street Ell Plan. |
90SS/90ST |
|
Thrd/SW 45 Ell Plan - Places a 45 degree threaded/socket elbow in the X-Y plane. For more information, see Thrd/SW 45 Ell Plan. |
45S/45T |
|
Thrd/SW 90 Red Ell Plan - Places a 90 degree threaded/socket reducing elbow in the X-Y plane. For more information, see Thrd/SW 90 Red Ell Plan. |
90RS/90RT |
|
Thrd/SW Tee Plan - Places a threaded/socket straight tee in the X-Y plane. For more information, see Thrd/SW Tee Plan. |
TESS/TEST |
|
Thrd/SW Tee Red Plan - Places a straight threaded/socket reducing tee in the X-Y plane. For more information, see Thrd/SW Tee Red Plan. |
TERS/TERT |
|
Thrd/SW Conc Swage - Places a concentric reducer swage in the X-Y plane. For more information, see Thrd/SW Conc Swage. |
SWGC |
|
Thrd/SW Ecc Swage - Places an eccentric reducer swage in the X-Y plane. For more information, see Thrd/SW Ecc Swage. |
SWGE |
|
Thrd/SW Conc w/Hub - Places a concentric reducer with threaded hub in the X-Y plane. For more information, see Thrd/SW Conc w/Hub. |
SWGCT |
|
Thrd/SW Ecc w/Hub - Places an eccentric reducer with threaded hub in the X-Y plane. For more information, see Thrd/SW Ecc w/Hub. |
SWGET |
|
Thrd/SW Cap - Places a threaded/socket pipe cap in the X-Y plane. For more information, see Thrd/SW Cap. |
CAPS/CAPT |
|
Thrd/SW Cross Plan - Places a four-way threaded/socket straight cross in the X-Y plane. For more information, see Thrd/SW Cross Plan. |
CRSS/CRST |
|
Thrd/SW Lateral Plan - Places a 45 degree threaded/socket lateral in the X-Y plane. For more information, see Thrd/SW Lateral Plan. |
LATS/LATT |
|
Thrd/SW Plug - Places a threaded/socket plug in the X-Y plane. For more information, see Thrd/SW Plug. |
PLGT |
|
Thrd/SW Bush/Insert - Places a threaded/socket bushing in the X-Y plane. For more information, see Thrd/SW Bush/Insert. |
BUSS/BUST |
|
Thrd/SW Full Clpg Plan - Places a threaded/socket full coupling in the X-Y plane. For more information, see Thrd/SW Full Clpg Plan. |
CPS/CPT |
|
Thrd/SW Half Clpg Plan - Places a threaded/socket half coupling in the X-Y plane. For more information, see Thrd/SW Half Clpg Plan. |
HCPS/HCPT |
|
Thrd/SW Reducing Clpg Plan - Places a threaded/socket reducing coupling in the X-Y plane. For more information, see Thrd/SW Reducing Clpg Plan. |
CPRS/CPRT |
|
Weld in Plan - Places a weldolet fitting in the X-Y plane. For more information, see Weldolet Weld in Plan. |
WOL |
|
Thrd in Plan - Places a threadolet fitting in the X-Y plane. For more information, see Threadolet Thread in Plan. |
TOL |
|
SW in Plan - Places a sockolet fitting in the X-Y plane. For more information, see Sockolet Socket Weld in Plan. |
SOL |
|
EOL-Weld in Plan - Places an elbowlet fitting in the X-Y plane on a plan elbow. For more information, see Elbowlet Weld in Plan. |
EOLW |
|
EOL-Thrd in Plan - Places an elbowlet fitting in the X-Y plane on a plan elbow. For more information, see Elbowlet Thread in Plan. |
EOLT |
|
EOL-SW in Plan - Places an elbowlet fitting in the X-Y plane on a plan elbow. For more information, see Elbowlet Socket Weld in Plan. |
EOLS |
|
LOL-Weld in Plan - Places a lateral 45 degree fitting in the X-Y plane. For more information, see Latrolet Weld in Plan. |
LOLW |
|
LOL-Thrd in Plan - Places a lateral 45 degree fitting in the X-Y plane. For more information, see Latrolet Thread in Plan. |
LOLT |
|
LOL- SW in Plan - Places a lateral 45 degree fitting in the X-Y plane. For more information, see Latrolet Socket Weld in Plan. |
LOLS |
|
Weld in Plan - Places a nipolet fitting in the X-Y plane. The branch end of the fitting is plain. For more information, see Nipolet Weld in Plan. |
NOLP |
|
Thrd in Plan - Places a nipolet fitting in the X-Y plane. The branch end of the fitting is threaded. For more information, see Nipolet Thread in Plan. |
NOLT |
|
Thrd/SW Union - Places a threaded/socket union in the X-Y plane. For more information, see Thrd/SW Union. |
UNS/UNT |
The commands in the table below are designed for modeling in 2D.
Command Name |
Command Line |
|
---|---|---|
Thrd/SW 90 Ell Side - Places a 90 degree threaded/socket elbow normal to the X-Y plane. For more information, see Thrd/SW 90 Ell Side. |
H90S/H90T |
|
Thrd/SW 90 Street Ell Side - Places a 90 degree threaded/socket street elbow normal to the X-Y plane. For more information, see Thrd/SW 90 Street Ell Side. |
H90SS/H90ST |
|
Thrd/SW 45 Ell Side - Places a 45 degree threaded/socket elbow normal to the X-Y plane. For more information, see Thrd/SW 45 Ell Side. |
H45S/H45T |
|
Thrd/SW 45 Ell Vert - Places a 45 degree threaded/socket elbow normal to the X-Y plane. For more information, see Thrd/SW 45 Ell Vert. |
V45S/V45T |
|
Thrd/SW 90 Red Ell Side - Places a 90 degree threaded/socket reducing elbow normal to the X-Y plane. For more information, see Thrd/SW 90 Red Ell Side. |
H90RS/H90RT |
|
Thrd/SW Tee Side - Places a threaded/socket straight tee normal to the X-Y plane. For more information, see Thrd/SW Tee Side. |
HTESS/HTEST |
|
Thrd/SW Tee Vert - Places a threaded/socket straight tee with the main normal to the X-Y plane. For more information, see Thrd/SW Tee Vert. |
VTESS/VTEST |
|
Thrd/SW Tee Red Side - Places a straight threaded/socket reducing tee with the branch normal to the X-Y plane. For more information, see Thrd/SW Tee Red Side. |
HTERS/HTERT |
|
Thrd/SW Tee Red Vert - Places a threaded/socket reducing straight tee with the main normal to the X-Y plane. For more information, see Thrd/SW Tee Red Vert. |
VTERS/VTERT |
|
Thrd/SW Cross Side - Places a four-way straight threaded/socket cross with the branch normal to the X-Y plane. For more information, see Thrd/SW Cross Side. |
HRCSS/HCRST |
|
Thrd/SW Lateral Side - Places a 45 degree threaded/socket lateral in the X-Y plane with the branch in the X-Z or Y-Z plane. For more information, see Thrd/SW Lateral Side. |
HLATS/HLATT |
|
Thrd/SW Lateral Vert - Places a 45 degree threaded/socket lateral with the main normal to the X-Y plane. For more information, see Thrd/SW Lateral Vert. |
VLATS/VLATT |
|
Thrd/SW Full Clpg End - Places a threaded/socket full coupling end normal to the X-Y plane. For more information, see Thrd/SW Full Clpg End. |
VCPS/VCPT |
|
Thrd/SW Half Clpg End - Places a threaded/socket half coupling component end normal to the X-Y plane. For more information, see Thrd/SW Half Clpg End. |
VHCPS/VHCPT |
|
Thrd/SW Reducing Clpg End - Places a threaded/socket reducing coupling end normal to the X-Y plane. For more information, see Thrd/SW Reducing Clpg End. |
VCPRS/VCPRT |
|
Weld in Vertical - Places a weldolet fitting normal to the X-Y plane. For more information, see Weldolet Weld in Vertical. |
VWOL |
|
Thrd in Vertical - Places a threadolet fitting normal to the X-Y plane. For more information, see Threadolet Thread in Vertical. |
VTOL |
|
SW in Vertical - Places a sockolet fitting normal to the X-Y plane. For more information, see Sockolet Socket Weld in Vertical. |
VSO: |
|
EOL-Weld in Side - Places an elbowlet fitting with in the X-Y plane on a side elbow. For more information, see Elbowlet Weld in Side. |
HEOLW |
|
EOL-Weld in Vert - Places an elbowlet fitting normal to the X-Y plane on a side elbow. For more information, see Elbowlet Weld in Vertical. |
VEOLW |
|
EOL-Thrd in Side - Places an elbowlet fitting with in the X-Y plane on a side elbow. For more information, see Elbowlet Thread in Side. |
HEOLT |
|
EOL-Thrd in Vert - Places an elbowlet fitting normal to the X-Y plane on a side elbow. For more information, see Elbowlet Thread in Vertical. |
VEOLT |
|
EOL-SW in Side - Places an elbowlet fitting with in the X-Y plane on a side elbow. For more information, see Elbowlet Socket Weld in Side. |
HEOLS |
|
EOL-SW in Vert - Places an elbowlet fitting normal to the X-Y plane on a side elbow. For more information, see Elbowlet Socket Weld in Vertical. |
VEOLS |
|
LOL-Weld in Side - Places a lateral fitting 45 degrees out of the X-Y plane. For more information, see Latrolet Weld in Side. |
HLOLW |
|
LOL-Thrd in Side - Places a lateral fitting 45 degrees out of the X-Y plane. For more information, see Latrolet Thread in Side. |
HLOLT |
|
LOL- SW in Side - Places a lateral fitting 45 degrees out of the X-Y plane. For more information, see Latrolet Socket Weld in Side. |
HLOLS |
|
Weld in Vertical - Places a nipolet fitting normal to the X-Y plane. The branch end of the fitting is plain. For more information, see Nipolet Weld in Vertical. |
VNOLP |
|
Thrd in Vertical - Places a nipolet fitting normal to the X-Y plane. The branch end of the fitting is threaded. For more information, see Nipolet Thread in Vertical. |
VNOLT |
The arrow in the lower right corner of a command button indicates a fly-out menu with additional commands available.