Default value: 0
Allowed values: 0, 1, 2, 3, and 4
Specifies the layers for component placement.
You can use UPDATELAYERBYLINENUMBERDATA to update a line number with the current LayerByLineNumber setting. If you set LayerByLineNumber to 0 and change it to 2, then run UPDATELAYERBYLINENUMBERDATA, the line number you select updates based on the settings defined below.
-
0
-
Solid:
-
The layer name of the solid is based on PRJ layer entry.
-
"_" is placed in front of the layer name: For example: 150 spec is on layer _150.
-
The color of the solid is set according to the table below:
-
-
Component level color PRJ |
Spec level color PRJ |
Spec layer color in model DWG file |
|
Entity Color Set to By Layer |
Same Color |
Same Color |
Same Color |
Entity Color Set to component level PRJ |
Same Color |
Same Color |
Different Color |
Entity Color Set to By Layer |
Same Color |
Different Color |
Same Color |
Entity Color Set to component level PRJ |
Same Color |
Different Color |
Different Color |
b. Center line
-
The layer name of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.
-
The color of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.
-
The line type of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.
-
Any changes to Setup > Layers > Centerline Settings changes the existing centerlines in the DWG file.
-
1
-
Solid
-
The layer name of the solid and center line is based on the Line Number name.
-
The color of the solid and center line is based on the CAD platform Layer settings.
-
The line type of the solid and center line is based on the CAD platform Layer settings.
-
Any changes made to the line number using CEDIT do not change the layer the solid and center line is on. Use t LAYER, GEDIT, or NUMBERASSIGN to change the layer of an existing solid or center line.
-
Centerline: Same implementation as Solid.
-
2
-
Solid:
-
The layer name of the solid is based on the Line Number name.
-
The color of the solid is based on the CAD platform Layer settings.
-
The line type of the solid is based on the CAD platform Layer settings.
-
Any changes made to the line number using CEDIT do not change the layer the solid and center line is on. Use LAYER, GEDIT, or NUMBERASSIGN to change the layer of an existing solid or center line.
-
Centerline:
-
The layer name of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.
-
The color of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.
-
The line type of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.
-
Any changes made to the line number using CEDIT do not change the layer the solid and center line is on. Use LAYER, GEDIT, or NUMBERASSIGN to change the layer of an existing solid or center line.
-
3
-
Solid
-
The layer name of the solid and center line is based on the Line Number name.
-
The color of the solid and center line has the same implementation for solid color as LayerByLineNumber = 0 setting shown in the table above.
-
The line type of the solid and center line is based on the CAD platform Layer settings.
-
Any changes made to the line number using CEDIT do not change the layer the solid and center line is on. Use LAYER, GEDIT, or NUMBERASSIGN to change the layer of an existing solid or center line.
-
Centerline: Same implementation as the Solid.
-
4
-
Solid:
-
The layer name for solid is based on the Line Number name.
-
The color of the solid has the same implementation for solid color as LayerByLineNumber = 0 setting shown in table above.
-
The line type of the solid is based on the CAD platform Layer settings.
-
Any changes made to the line number using CEDIT do not change the layer the solid and center line is on. Use LAYER, GEDIT, or NUMBERASSIGN to change the layer of an existing solid or center line.
-
Centerline:
-
The layer name of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.
-
The color of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.
-
The line type of the centerline is based on Plant > Setup > Configuration Layers > Cl setting.
-
Any changes made to the line number using CEDIT do not change the layer the solid and center line is on. Use LAYER, GEDIT, or NUMBERASSIGN to change the layer of an existing solid or center line.