Before you can complete the following instructions you must complete Set selection codes on gasket and bolt components in the project, and Assign gaskets and bolts to the flange in the project.
-
Open CADWorx Equipment, and create a 3D equipment model.
-
Click Skirt .
-
Type V-1016 in the Enter equipment name box, and then click OK.
The skirt inserts in the drawing.
-
Click Elliptical Head .
The elliptical head inserts in the 3D model.
-
Click Cylinder .
The cylinder inserts in the 3D model.
-
Click Cone .
The cone inserts in the 3D model.
-
Click Elliptical Head .
The elliptical head inserts in the 3D model.
-
Click Components.
-
Click Cylinder in the list.
-
Click + next to Cylinder.
-
Type 240 in the Length box.
-
Click + next to Cone.
-
Type 84 in the Length box.
-
Click Cylinder in the list.
-
Click Nozzle .
The nozzle inserts in the 3D model.
-
Click + next to Nozzle.
-
Type 120 in the Distance box.
-
Click Standard Nozzle Details, and then click the ellipsis .
-
Type GAS_150A, GAS_150B in the Applicable Gaskets box.
-
Type BLT_150, BLT_150C in the Applicable Bolts box.
-
Click OK.
-
Click File > Save As.
-
Type V-1016 in the File name box, and then click Save.
Next, Insert piping components on equipment containing selection codes.