Set selection code defaults - CADWorx - Help

CADWorx Equipment

Language
English
Product
CADWorx
Subproduct
Equipment
Search by Category
Help
CAESAR II Version
12
CADWorx Version
20.0 (2020)
CADWorx Structure Version
2020(4.0)
  1. Open the Specification Editor.

  2. Click File > Open, and then open the Tutorial_Inch_Catalog.cat.

  3. Expand Data Tables, and then expand Gaskets/Bolts/Welds.

    You can also create new bolts and gasket data tables, and then assign the Selection Code when creating the new data tables. If you need to create a new data table, see Add a new data table to a category, or Add a new data table to a group folder.

  4. Expand Stud Bolts, and then click BLT_150.

  5. In Properties, type BLT_150 in the Selection Code box, and change the Color Index to Red.

  6. Click in another field to set the values.

  7. Click BLT_150A.

  8. In Properties, type BLT_150A in the Selection Code box, and change the Color Index to Green.

  9. Click in another field to set the values.

  10. Click BLT_150B.

  11. In Properties, type BLT_150B in the Selection Code box, and change the Color Index to Yellow.

  12. Click in another field to set the values.

  13. Expand Gasket, and then double-click GAS_150.

  14. In Properties, type GAS_150 in the Selection Code box, and change the Color Index to Yellow.

  15. Click in another field to set the values.

  16. Click GAS_150A.

  17. In Properties, type GAS_150A in the Selection Code box, and change the Color Index to Green.

  18. Click in another field to set the values.

  19. Click GAS_150B.

  20. In Properties, type GAS_150B in the Selection Code box, and change the Color Index to Red.

  21. Click in another field to set the values.

  22. Click File > Save.

Next, Assign gaskets and bolts to flange weld neck in the catalog.