Toolbar:
Specifies the parameters of the skirt.
Description
Specifies an alphanumeric description for the component. This description is visible even when the component is collapsed in the grid.
Length
Specifies the distance from the starting point to the ending point of the component.
Diameter Basis
Specifies either the inside or outside diameter. Select the diameter type from the list.
Diameter
Specifies the diameter of the component based on the Diameter Basis value.
Thickness
Specifies the component thickness.
Flip Orientation
Reverses the orientation of the component.
Material
Displays the Select Item dialog box, which lets you select the material from the list. For more information, see Select Item Dialog Box. The Select Item dialog box uses the file specified by the MaterialFile configuration file variable. For more information, see MaterialFile.
Basering Type
Specifies the type of basering to attach to the skirt. Available options are:
-
None
-
Simple - No Gussets
-
With Gussets
-
With Top Plates
-
Continuous Top Plate
Base Diameter
Specifies the skirt base diameter.
Basering ID
Specifies the component inner diameter.
Basering OD
Specifies the component outer diameter.
Bottom Plate Thickness
Specifies the component thickness.
Top Plate Radial Width
Specifies the component width.
Top Plate Thickness
Specifies the component thickness.
Top Plate Width
Specifies the component width.
Gusset Height
Specifies the component height.
Gusset Width
Specifies the skirt gusset width.
Distance Between Gussets
Specifies the distance between gussets on the skirt.
Gusset Thickness
Specifies the component thickness.
Number Of Bolts
Specifies the number of bolts on the skirt.
Insulation
Displays the Insulation dialog box. For more information, see Insulation Dialog Box.