Toolbar:
Specifies the parameters for the saddle.
This component cannot be created by itself. It must be attached to the following component:
Description
Specifies an alphanumeric description for the component. This description is visible even when the component is collapsed in the grid.
Distance
Specifies the distance from the bottom of the component to which this component is attached.
Width
Specifies the component width.
Height
Specifies the component height.
Contact Angle
Specifies the saddle contact angle.
Plate Thickness
Specifies the component thickness.
Wear Pad Width
Specifies the component width.
Wear Pad Thickness
Specifies the component thickness.
Wear Pad Contact Angle
Specifies the saddle wear pad contact angle.
Base Plate Length
Specifies the distance from the starting point to the ending point of the component.
Base Plate Width
Specifies the component width.
Base Plate Thickness
Specifies the component thickness.
Number of Ribs
Specifies the number of ribs.
Rib Thickness
Specifies the component thickness.
Web Thickness
Specifies the component thickness.
Web Location
Specifies the web location.
Bolts
Displays the Bolt Details dialog box. For more information, see Bolt Details Dialog Box.
Material
Displays the Select Item dialog box, which lets you select the material from the list. For more information, see Select Item Dialog Box. The Select Item dialog box uses the file specified by the MaterialFile configuration file variable. For more information, see MaterialFile.
Layout angle
Specifies the angle of the saddle from the equipment.
Fixed saddle
Specifies the saddle is fixed or not.